The LEDHead is the first in a series of special market Wiring/Arduino compatible, Atmel microcontroller boards from Rogue Robotics.

The LEDHead is an Atmel ATmega644P based board which provides full shield support while adding more I/0 and 8 dedicated LEDs. Running at 16 MHz, and with an on-board TWI controlled Real Time Clock (RTC), the unit is designed to provide control for data storage and audio solutions with the rMP3 Playback module as a full solution for data logging and/or audio playback.

The ATmega644P provides more I/O and 2 hardware serial ports that can also function as master SPI ports.

The LEDHead is a low cost solution via the elimination of unnecessary components for volume deployment and rapid prototyping - external USB solution, and minimal part count.

FEATURES
* 1 Amp 7805 Voltage Regulator
* MCU: Atmel ATmega644P (pico-power)
* 16 MHz Crystal Oscillator
* Total Flash Memory: 65536 bytes (64 KiB)
* Available Flash Memory: 63488 bytes (62 KiB)
* SRAM: 4096 bytes (4 KiB)
* EEPROM: 2048 bytes (2 KiB)
* 2 Hardware Serial Ports
* DS1307 RTC (Real Time Clock) On-board
* 8 User LEDs On-Board
* Wiring/Arduino IDE compatible (core download required)

NOTE: an external USB board (such as the SparkFun FTDI Basic Breakout - 5V [DEV-09115]) is required to communicate with the LEDHead.

ONLINE DOCUMENTATION
http://www.roguerobotics.com/wikidocs/rduino/ledhead/documentation/start

PROJECTS AND EXAMPLES
http://www.roguerobotics.com/wikidocs/code/start

SOFTWARE AND LIBRARIES
http://code.google.com/p/rogue-code/downloads/list?q=rduino

--

If this board is out of stock on InMojo, try the Rogue Robotics Store:
http://www.roguerobotics.com/products/electronics/ledhead